Avaya Using Technician Interface Software Manual do Utilizador descarregar pdf (Página 214)

Using Technician Interface Software

7-78

308657-14.00 Rev 00

Obtaining IPv6 Route and Node Information

The

ip6 routes

command displays IPv6 routes using the various subcommand

options mentioned in Table 7-12

Table 7-12. Options for ip6 routes Command

Option Description

Retrieves IPv6 addresses (prefixes) that match the address

(prefix) entry

Retrieves a range of IPv6 addresses (prefixes) that match your

entry. Specify all or part of an IPv6 address and a prefix length

from 1 to 128 bits.

-i

Retrieves all routes that point out the interface index number

you specify

-p

Retrieves data for all routes sourced by the protocol you specify.

Protocol options are as follows:

• DIR - directly attached networks

• ST - static network routes

• RIP - RIPv6 routes

• ND - neighbor discovery routes

• IDRP - IDRP routes

• IF - local interface routes

• SN - static adjacent node addresses

• DN - dynamically learned adjacent node addresses

• SYS - routes installed by the IPv6 kernel

-n

Retrieves data for all network routes

-h

Retrieves data for all local node (host) routes

-l

Displays data in long format (that is, provides additional route

information including the type of route interface, the next hop

IPv6 address, and when the route was last updated)

Note:

Dynamically learned adjacent node addresses appear only when you

apply the

-pDN

option.

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 343 344

Comentários a estes Manuais

Sem comentários

Avaya Using Technician Interface Software Manual do Utilizador Página 214

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya Using Technician Interface Software