Avaya Using Technician Interface Scripts Manual do Utilizador descarregar pdf (Página 681)

100

101

show x25

2-629

conﬁguration [

<slot.connector>

]

Displays the basic conﬁguration information for all X.25 lines or displays that only the

slot and connector speciﬁed. Each line is associated with the services available on that line

and the number of virtual circuits conﬁgured. The table includes the following information

for the protocol:

Sample Display – show x25 conﬁguration 2.1

X.25 Configuration

------------------

Services LCN's

Protocol Slot.Connector.Line.LLIndex Available Configured

-------- --------------------------- --------- ----------

X.25 2.1.202101.0 PDN 4

1 Configuration Entries.

connections [

<slot.connector>

]

Displays the virtual circuit connect and disconnect counts for normal and abnormal

conditions for all lines or for a speciﬁc line (slot and connector). The table includes the

following information:

Slot.Connector.Line.LLIndex The identity of the line. This includes four parts as follows:

slot number, connector number, number of the line that the

driver X.25 runs on, lower-layer index from the layer

immediately below X.25 on the protocol stack. If the lower

layer is a driver, the index is 0.

Services Available Type of service available on this line: PDN, DDN, or PTOP.

LCN’s Conﬁgured Number of logical channels conﬁgured; includes LCNs for

incoming, bidirectional, and outgoing VCs.

Line Line slot and connector.

Total VC Connections Total number of virtual connections performed since starting up.

1 2 ... 676 677 678 679 680 681 682 683 684 685 686 ... 787 788

Comentários a estes Manuais

Sem comentários

Avaya Using Technician Interface Scripts Manual do Utilizador Página 681

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya Using Technician Interface Scripts