Avaya Call Detail Recording System Manual do Utilizador descarregar pdf (Página 30)

30 Chapter 3 Configuring and managing CDR data

NN40010-602NN40010-602

Selecting a BCM List file

When you start the CDR Pull Client, you must select a BCM List file before you can continue.

To select the BCM List file

1 Click Browse.

2 Navigate to the folder that contains the BCM List file you want to select.

3 Click the BCM List file you want to use and click Open.

Configuring the systems on the BCM List file

After you have selected or created the BCM List file, you need to configure the connection

information for the BCM systems on the list. Configuring the connection information includes the

following:

• “Adding a system to the BCM List file”

• “Modifying a system on the BCM List file”

• “Deleting a system from the BCM List file”

Adding a system to the BCM List file

To add a BCM system to the BCM List file

1 Select the BCM List file to which you want to add this BCM system.

2 In the Name field, type the System Name of the BCM system.

3 In the IP Address box, type the IP address of the BCM system.

4 In the User ID field, type the username for the User Profile you want the CDR Pull Client to

use to connect to the BCM system.

The User Profile you use must be assigned to the CDRUserGroup. For more information about

User Profiles, refer to the Administration Guide .

5 In the Password field, type the password for the User Profile you are using.

6 Click Add.

The name of the BCM system appears on the BCM Name list.

Note: If there is no BCM List file, or if you want to add another BCM List file, refer

to “Creating a BCM List file” on page 29.

Note: The system name is an arbitrary name meaningful to the CDR Pull Client.

It does not have to be the name associated with the BCM.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 69 70

Sem comentários

Avaya Call Detail Recording System Manual do Utilizador Página 30