Avaya Configuring WAN Line Services Manual do Utilizador descarregar pdf (Página 36)

Configuring WAN Line Services

2-2

117345-B Rev. 00

You can configure synchronous interfaces to integrate IBM SDLC traffic in an

internetwork. Traffic is integrated by connecting local or remote IBM equipment

directly to the synchronous interface and configuring either DLSw for SDLC or

Transparent Sync Pass-Thru features.

Using the BCC to Edit Synchronous Line Parameters

You can use the Bay Command Console (BCC) to configure some of the

parameters described in this chapter. If a parameter has a BCC command, the

section that describes that parameter also contains the BCC command syntax and

one or more command examples.

The BCC commands in this chapter assume that you have started BCC from a

local console attached to the router. (See Using the Bay Command Console.) To

start BCC, log in to the router from your console, then perform the following

steps:

At the console command-line prompt (

), type:

bcc

A series of short instructions appears. The prompt changes to bcc>.

At the

bcc

prompt, type:

bcc>

config

After a short message, the screen displays the box prompt.

At the

box

prompt, type:

box>

show config

The console displays the current router configuration, including installed

modules and protocols.

At the

box

prompt, choose a sync module, slot number, and connector

number from the configuration by typing:

box>

sync slot 2 connector 1

The prompt changes to sync/2/1/#.

At the

sync/2/1

prompt, use the BCC commands that allow you to

configure the synchronous parameters described in this chapter.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 293 294

Comentários a estes Manuais

Sem comentários

Avaya Configuring WAN Line Services Manual do Utilizador Página 36

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya Configuring WAN Line Services