Avaya Configuring WAN Line Services Manual do Utilizador descarregar pdf (Página 236)

Configuring WAN Line Services

A-28

117345-B Rev. 00

MCT1 Port Application and Clock Parameters

Parameter: Port Application Mode

Path: Unconfigured MCT1 Connector > Port Application

Default: NONPRI

Options: NONPRI

PRI

Function: Specifies the port application to use on the logical lines.

Instructions: Select NONPRI to indicate that all of the lines have a permanent circuit number

and are for leased lines, frame relay, or permanent connections to other

non-ISDN PRI applications.

Select PRI to indicate that the lines are for switched circuits using ISDN.

MIB Object ID: 1.3.6.1.4.1.18.3.4.9.1.16

Parameter: Primary Clock

Path: MCT1 CLOCK Connector > Edit Slot > DS1/E1 Clock Parameters

Default: Port 1 Ext Loop

Options: Internal

Port 1 Ext Loop

Port 2 Ext Loop

Auxiliary Ext

Function: Identifies the primary source of the timing signals.

Instructions: Select Internal to use the clock chip on the link or net module.

Select Port 1 Ext Loop to use the signal coming from port 1.

Select Port 2 Ext Loop to use the signal coming from port 2

(Dual-Port MCT1 only).

Select Auxiliary Ext to use an external source via BNC connectors.

MIB Object ID: 1.3.6.1.4.1.18.3.4.9.1.1.4

1 2 ... 231 232 233 234 235 236 237 238 239 240 241 ... 293 294

Sem comentários

Avaya Configuring WAN Line Services Manual do Utilizador Página 236