Avaya Configuring WAN Line Services Manual do Utilizador descarregar pdf (Página 237)

Site Manager WAN Line Services Parameters

117345-B Rev. 00

A-29

MCT1 Port Parameters

You access the MCT1 port parameters from the Configuration Manager window.

Parameter: Secondary Clock

Path: MCT1 CLOCK Connector > Edit Slot > DS1/E1 Clock Parameters

Default: Internal

Options: Internal

Port 1 Ext Loop

Port 2 Ext Loop

Auxiliary Ext

Function: Identifies the secondary source of the timing signals. The router uses the

secondary clock only when the primary clock is unavailable.

Instructions: Select Internal to use the clock chip on the link or net module.

Select Port 1 Ext Loop to use the signal coming from port 1.

Select Port 2 Ext Loop to use the signal coming from port 2

(Dual-Port MCT1 only).

Select Auxiliary Ext to use an external source via BNC connectors.

MIB Object ID: 1.3.6.1.4.1.18.3.4.9.1.1.5

Parameter: Enable/Disable

Path: MCT1 Connector > Edit Logical Lines > Port Details > MCT1 Port Parameters

Default: Enable

Options: Enable

Disable

Function: Enables or disables the MCT1 port.

Instructions: Set to Disable only if you want to disable the MCT1 port.

MIB Object ID: 1.3.6.1.4.1.18.3.4.9.3.1.2

1 2 ... 232 233 234 235 236 237 238 239 240 241 242 ... 293 294

Sem comentários

Avaya Configuring WAN Line Services Manual do Utilizador Página 237