
Configuring Line Services
A-8 114078 Rev. A
Parameter: Status Report Protocol
Path: FDDI Connector > Edit Line > Edit FDDI Parameters
Default: Enable
Options: Enable
| Disable
Function: Specifies whether the node will generate Status Report Frames (SRFs) for its
implemented events (for example, high bit errors, topology changes, trace status
events, MAC frame error condition, port LER condition, and MAC duplicate
address condition).
Instructions: Accept the default, Enable, if you want the node to generate SRFs; specify
Disable if you do not want the node to generate SRFs. We recommend using
Enable to ensure that your FDDI network is ANSI-compliant.
MIB Object ID: 1.3.6.1.4.1.18.3.4.15.1.3.1.14
Parameter: Trace Max Expiration (ms)
Path: FDDI Connector > Edit Line > Edit FDDI Parameters
Default: 7000 milliseconds (7 seconds)
Options: 6001 to 256000 milliseconds
Function: Specifies the maximum propagation time for a trace on an FDDI topology.
Instructions: Enter a value from 6001 to 256000. We recommend accepting the default value
of 7000 milliseconds.
MIB Object ID: 1.3.6.1.4.1.18.3.4.15.1.3.1.15
Parameter: Duplicate Address Protocol
Path: FDDI Connector > Edit Linee > Edit FDDI Parameters
Default: Enable
Options: Enable
| Disable
Function: Implements an optional ANSI duplicate address test involving periodic
transmission of Network Service Address Network Interface Function (NSA
NIF) frames to the source.
Instructions: Accept the default, Enable, if you want to test for duplicate addresses. Specify
Disable if you do not want to test for duplicate addresses.
MIB Object ID: 1.3.6.1.4.1.18.3.4.15.1.3.1.18
Comentários a estes Manuais