
Starting DLSw
114063 Rev. A 4-7
Figure 4-4. Add DLSw Slot Configuration Window
2. Enter the appropriate slot value and its IP address.
Use the following parameter descriptions as a guide.
3. Click on OK.
The DLSw Slot Configuration window reappears. Repeat the instructions in
this section for each slot that you want to add.
4. Click on Done.
Parameter: Slot
Default: None
Range: 1 to 14
Function: Specifies the slot number associated with the Token Ring or Ethernet
interface over which DLSw is running.
Instructions: Enter a slot number that is valid for running DLSw, considering the router
model and the slots that link modules can occupy. You should enter only
slots running DLSw.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.3.1.2
Comentários a estes Manuais