Avaya Configuring DLSw Services Manual do Utilizador Página 161

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 160
Editing DLSw Parameters
114063 Rev. A 5-43
Parameter: MAC Address
Default: None
Options: Any valid, 48-bit MAC address expressed in hexadecimal notation
Function: Specifies the MAC address associated with the SNA system or application
that you want to reach via DLSw services.
Instructions: Type in hexadecimal format the MAC address associated with the remote
SNA system or application that you want to reach via DLSw services.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.10.1.2
Parameter: MAC Peer IP Address
Default: None
Options: Any valid, 32-bit IP address in the form network.host (using dotted
decimal notation)
Function: Specifies the IP address of a remote DLSw peer that can reach the remote
SNA system or application identified by the MAC address in the same
Default MAC Peer IP Table entry. The router adds this IP address to the
list of configured peers in the DLSw Peer IP Table.
Instructions: Type the IP address of the remote DLSw peer that can reach the remote
SNA system or application identified by the MAC address in the same
Default MAC Peer IP table entry.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.10.1.3
Editing a DLSw Default MAC Peer IP Table Entry
You can edit only the Default MAC Peer IP Address parameter in the Default
MAC Peer IP Table. To edit the DLSw MAC Peer IP Address, begin at the
Configuration Manager window (
refer to Figure 5-1):
1. Select Protocols > DLSw > Default MAC.
The DLSw MAC Peer Configuration window appears
(Figure 5-25).
2. Select the entry to edit.
3. Click on the Default MAC Peer IP Address parameter window and enter
a new address.
Vista de página 160
1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 255 256

Comentários a estes Manuais

Sem comentários