
Editing DLSw Parameters
114063 Rev. A 5-55
Parameter: MAXOUT
Default: 7
Range: 1 to 127
Function: Controls the maximum number of consecutive frames that an SDLC link
station can send without acknowledgment.
Instructions: Type a value from 1 to 127.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.7.5.1.10
Parameter: MAXDATA
Default: 2057
Options: 265
| 521 | 1033 | 2057
Function: Specifies the maximum frame size that SDLC supports. This value
includes the transmission header (TH) and request header (RH).
Instructions: Enter a maximum frame size that is equal to or larger than the largest
frame size that will be received.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.7.5.1.7
Parameter: Canureach Timer
Default: 30 s
Range: 0 to 3600
Function: Specifies the time interval (in seconds) after which the router sends a
CANUREACH message to the remote DLSw peer to establish a session.
Instructions: Enter the number of seconds you want for the time interval. For example,
type 1 to transmit a CANUREACH message once per second, or type
3600 to transmit the message once per hour. Type 0 if you do not want to
transmit a CANUREACH message.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.12.1.11
Comentários a estes Manuais