Avaya Configuring Traffic Filters and Protocol Prioritization Manual do Utilizador descarregar pdf (Página 55)

Using Circuit-level Protocol Prioritization

2-21

Parameter: Prioritization Algorithm Type

Default: BANDWIDTH ALLOCATION

Options: BANDWIDTH ALLOCATION | STRICT

Function: Selects the dequeuing algorithm that protocol prioritization uses to drain

priority queues and transmit trafﬁc. With strict dequeuing, the router

always transmits trafﬁc in the high-priority queue before trafﬁc in the

other queues. With bandwidth allocation dequeuing, the router transmits

trafﬁc in a queue until the utilization percentage for that queue is reached,

and then the router transmits trafﬁc in the next-lower-priority queue. (You

conﬁgure the percentages for bandwidth allocation by setting the Hiqh

Queue, Normal Queue, and Low Queue Percent Bandwidth parameters.)

Instructions: Accept the default of BANDWIDTH ALLOCATION or select STRICT.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.4.1.1.24

Parameter: High Queue Percent Bandwidth

Default: 70

Range: 0 to 100 percent

Function: If you select the bandwidth allocation dequeuing algorithm, this

parameter speciﬁes the percentage of the synchronous line’s bandwidth

allocated to trafﬁc that has been sent to the high-priority queue. When you

set this parameter to a value less than 100, each time the percentage of

bandwidth used by high-priority trafﬁc reaches this limit, the router

transmits trafﬁc in the normal- and low-priority queues, up to the

conﬁgured percentages for those priority queues.

Instructions: Specify the percentage of the line’s bandwidth allocated for high-priority

trafﬁc. The High Queue Percent Bandwidth, Normal Queue Percent

Bandwidth, and Low Queue Percent Bandwidth values must total 100.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.4.1.1.25

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 161 162

Sem comentários

Avaya Configuring Traffic Filters and Protocol Prioritization Manual do Utilizador Página 55