Avaya Configuring Traffic Filters and Protocol Prioritization Manual do Utilizador Página 52

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 162
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 51
Configuring Traffic Filters and Protocol Prioritization
2-18
Priority Interface Parameter Descriptions
Use the following descriptions as guidelines when you edit parameters in the Edit
Protocol Priority Interface window.
Parameter: Enable
Default: Enable
Options: Enable | Disable
Function: Toggles protocol prioritization on and off on this interface. If you set this
parameter to Disable, all outbound filters will be disabled on this
interface. Setting this parameter to Disable is useful if you want to
temporarily disable all outbound filters rather than delete them.
Instructions: Set to Disable if you want to temporarily disable all protocol
prioritization activity on this interface. Set to Enable if you previously
disabled protocol prioritization on this interface and now want to
re-enable it.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.4.1.1.2
Parameter: High Queue Size
Default: 20
Options: Any integer value
Function: Specifies the maximum number of packets in the high-priority queue at
any one time, regardless of packet size. For information about using
queue depth for tuning protocol prioritization in your network, refer to
“Tuning Protocol Prioritization,” earlier in this chapter.
Instructions: Accept the default of 20 packets or enter a new value.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.4.1.1.4
Vista de página 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 161 162

Comentários a estes Manuais

Sem comentários