Avaya BCM50 Guia de Configuração descarregar pdf (Página 503)

100

101

Chapter 70 Dial Up Interfaces panel 503

Networking Configuration Guide

To add an ISDN interface

1 Click Configuration > Resources > Dial Up Interfaces.

2 On the Dial-out Interfaces tab, click Add.

The Add Dial Up Interface dialog box appears.

3 Select ISDN from the Interface type drop-down list.

4 Enter a logical name in the Interface name field.

5 Select the Automatic Dialout check box to use this interface for scheduled service. Refer to

“Creating an automatic dial-out interface” on page 521.

6 Click OK.

The interface appears in the Dial-out Interfaces table.

Enabling an ISDN interface

An interface must be enabled to function as a backup connection. If the BCM experiences a

primary connection failure, it will dial-out using the dial-up interface configured as the backup.

See “WAN failover” on page 513.

To enable an ISDN interface

1 Click Configuration > Resources > Dial Up Interfaces.

2 On the Dial-out Interfaces tab, select the ISDN interface.

3 On the Link Parameters tab, enter the Dial-out number for the ISDN interface.

4 On the Dial-out Interfaces tab, select the Enable check box next to the ISDN interface to

enable.

To disable an ISDN interface

1 Click Configuration > Resources > Dial Up Interfaces.

2 On the Dial-out Interfaces tab, clear the Enable check box next to the interface.

Connecting an ISDN interface

Interfaces can be connected manually, or they can be triggered to connect by auto dial-out, see

“Creating an automatic dial-out interface” on page 521. Auto dial-out routes can not be added if

the interface is already manually connected, unless the interface is already connected with auto

dial-out routes configured.

Note: BCM50 R2 will only allow the configuration of two ISDN

auto-dialout interfaces. When both of these interfaces are enabled ISDN

dial-in will be disabled.

1 2 ... 498 499 500 501 502 503 504 505 506 507 508 ... 567 568

Comentários a estes Manuais

Sem comentários

Avaya BCM50 Guia de Configuração Página 503

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya BCM50