
Chapter 66 DHCP Server Settings panel 485
Networking Configuration Guide
Action <read-only> The initial action code for the IP telephone.
Retry count <number> The delay before an IP phone retries connecting to the proxy
server.
Secondary Terminal Proxy Server (S2)
IP address <IP address>
10.10.10.10
The IP address of the Proxy Server for IP phones.
Port <drop-down list> Select the appropriate port:
BCM
SRG
Meridian 1/Succession 1000
Centrex/SL-100
Other
Port number <number> The port number on the terminal through which IP phones
connect.
Action <read-only> The initial action code for the IP telephone.
Retry count <number> The delay before an IP phone retries connecting to the proxy
server.
VLAN
VLAN identifiers
(comma-delimited)
Specify the Virtual LAN (VLAN) ID numbers that are given to
the IP telephones.
If you want DHCP to automatically assign VLAN IDs to the IP
telephones, enter the VLAN IDs in the following format:
VLAN-A:id1, id3,...,idn.
where:
VLAN-A is an identifier that tells the IP telephone that this
message is a VLAN discovery message.
id1, id2,...idn are the VLAN ID numbers that DHCP can assign
to the IP telephones. You can have up to 10 VLAN ID
numbers listed. The VLAN ID numbers must be from 0 to
4095.
For example, if you wanted to use VLAN IDs 1100, 1200,
1300 and 1400, you would enter the following string in this
box: VLAN-A:1100, 1200, 1300, 1400.
If you do not want DHCP to automatically assign VLAN IDs to
the telephones, enter VLAN-A:none, in this text box.
Note1: The NORTEL IP Terminal VLAN ID string, must be
terminated with a period (.).
Note2: If you do not know the VLAN ID, contact your network
administrator.
Note3: For information about how to set up a VLAN, refer to
the user documentation that came with your VLAN compatible
switch.
Table 105 IP Terminal DHCP Options (Sheet 2 of 2)
Attribute Value Description
Comentários a estes Manuais