Avaya BCM50 Guia de Configuração descarregar pdf (Página 303)

100

101

Chapter 32 Private networking: MCDN over PRI and VoIP 303

Networking Configuration Guide

MCDN networking checklist

The following points provide a quick check for the system prerequisite settings for MCDN

networking.

Select the dialing plan to be used:

• UDP (Universal Dialing Plan)

— DNs on the same node are dialed directly.

— DNs on other nodes are called by first dialing an Access Code and an ESN.

— Each node has its own ESN.

• CDP (Coordinated Dialing Plan)

— DNs on all nodes are dialed directly.

Ensure the following common programming is configured:

•BCM Programming

— Configure the system DN length to match the DN length used in the rest of the private

network.

— Program the private Route: Type=Private, Dial=None.

— Program the public Route: Type=Public, Dial=None.

— Enable the MCDN Supplementary Services; TRO=selected, ICCL=selected,

TAT= selected.

— Program telephones with a target line that specifies the system DN of the telephone in the

Private received number field.

• Meridian 1 Programming

— Program the system PNI and the PNIs for the routes.

— Program the Meridian voice mailboxes (if required).

— Enable the MCDN Supplementary Services: RCAP=[ND2,TRO,MWI], NASA=YES.

Set up the specific programming the system requires for the dialing plan. Refer to the following

tables.

Note: If you have public DNs set up for your telephones that are

different from the system-assigned DN, each telephone needs to use the

public and private received digits on the target line.

1 2 ... 298 299 300 301 302 303 304 305 306 307 308 ... 567 568

Comentários a estes Manuais

Sem comentários

Avaya BCM50 Guia de Configuração Página 303

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya BCM50