Avaya BCM50 Guia de Configuração descarregar pdf (Página 298)

100

101

298 Chapter 32 Private networking: MCDN over PRI and VoIP

NN40020-603NN40020-603

The Meridian must provide the following:

— end-to-end signaling (option 10)

— message center (option 46) and an IVMS link (option 35)

— Meridian Mail link (options 77 and 85)

— basic Attendant Console Directory features (options 40, 45, and 83)

— ISDN PRI or ISDN Signaling link (options 145 and 146 or 145 and 147)

— advanced ISDN features (option 148)

— network message services (option 175)

• act as the timing master for the private network connections

• use descending mode for PRI B-channel selection

• recognize dial codes for all nodes in the network

• provide routing tables that direct incoming calls to the correct nodes on the network, including

DID calls from the public network

• recognize the destination code (usually 9) that indicates a public network call, regardless of

where in the network the number was dialed from

Software requirements

These additional software packages may be required to activate all the options on the Meridian.

For a new M1 (option 81C, 61C or 51C) on X11 Rls 25, the following additional packages are

required to provide the software options listed above:

• SW0059B

• SW0052D

• SW0221C

• SW0051B

For a new M1 Option 11C or 11C Mini or X11 Rel. 25, order one of the following:

• Enterprise software package

• NAS/VNS software package

Note: For MCDN over VoIP trunks, the Meridian uses the IPT trunk

card. Both systems must have remote gateways pointed to correct system

types and protocols. Refer to “Configuring VoIP trunk gateways” on

page 381 for information about Remote Gateways for the BCM system.

1 2 ... 293 294 295 296 297 298 299 300 301 302 303 ... 567 568

Comentários a estes Manuais

Sem comentários

Avaya BCM50 Guia de Configuração Página 298

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya BCM50