
Administering Options for Avaya Agent Deskphone 16CC Telephones
Issue 1 January 2008 79
PHY2STAT 1 Secondary Ethernet interface setting
(0=Secondary Ethernet interface off/disabled,
1=auto-negotiate, 2=10Mbps half-duplex, 3=10Mbps
full-duplex, 4=100Mbps half-duplex, 5=100Mbps
full-duplex), and, for post-Release S1.0 use,
6=1000Mbps full-duplex (if supported by the hardware).
PHY2VLAN 0 VLAN identifier used by frames received on or forwarded
to the secondary Ethernet interface. Set this parameter
only when VLAN separation is “1” (enabled). Value is 1-4
ASCII numeric digits from “0” to “4094.” Null is not a valid
value, nor can the value contain spaces.
PROCPSWD 27238 Text string containing the local (dialpad) procedure
password (Null or 1-7 ASCII digits). If set, password must
be entered immediately after accessing the Craft Access
Code Entry screen, either during initialization or when
Mute is pressed to access a craft procedure. Intended to
facilitate restricted access to local procedures even when
command sequences are known. Password is viewable,
not hidden.
PROCSTAT 0 Controls access to local (dialpad) administrative
procedures. Values are:
0 = Full access to craft local procedures.
1 = restricted access to craft local procedures.
PROVIDE_ LOGOUT 1 Flag to define whether or not logout function is provided
to user. If disabled and phone is operating in user mode,
hide "Logout" item in A (Avaya) menu. Values are: 0=off;
1=on.
PROVIDE_
NETWORKINFO_
SCREEN
1 Flag to define whether or not "Network Information"
menu is provided to user. If disabled and phone is
operating in user mode, hide complete "Network
Information" option/sub-menu. Values are: 0=off; 1=on.
PROVIDE_OPTIONS_
SCREEN
1 Flag to define whether or not "Options & Settings" menu
is provided to user. If disabled and phone is operating in
user mode, hide complete "Option & Settings" menu tree.
Values are: 0=off; 1=on.
REGISTERWAIT 3600 Number of seconds for next re-registration to SIP server.
Range in seconds 10 - 1 000 000 000.
ROUTER 0.0.0.0 Address(es) of default router(s) / gateway(s) in the IP
network. Range is 7-127 characters defining one or more
IP Addresses in dotted decimal format, separated by
commas without any intervening spaces.
RTCPCONT 1 Enables/disables the RTCP in parallel to RTP audio
streams. Values are 0=RTCP disabled, 1=RTCP
enabled.
RTP_PORT_LOW 5004 Specifies lower limit of a port range to be used by RTP/
RTCP or SRTP/SRTCP connections, for example, to
adapt to firewall traversal policies. Values: 1024-65503.
Table 9: Avaya Agent Deskphone 16CC Customizeable System Parameters (continued)
Parameter
Name
Default
Value
Description and
Value Range
10 of 13
Comentários a estes Manuais