Avaya 16CC Guia do Utilizador descarregar pdf (Página 78)

Administering Telephone Options

78 Avaya Agent Deskphone 16CC Administrator Guide

NO_DIGITS_TIMEOUT 20 Number of seconds of delay after going "off-hook" or

getting secondary dial tone before phone automatically

plays a warning tone and does not accept dial input any

longer. Range in seconds is 1 to 60.

OUTBOUND_

SUBSCRIPTION_

REQUEST_DURATION

86400 Number of seconds used in initial SUBSCRIBE

messages. This is the suggested duration value of the

telephone, which might be lowered by the server,

depending on the server configuration. Range is

60-31536000. Note that the default value is equal to one

day and the maximum value represents one year.

PHNCC 1 Telephone country code. The administered international

country code for the location by the algorithm that dials

calls from the incoming Call Log. Range: 1-3 digits, from

“1” to “999.”

PHNDPLENGTH 5 Internal extension telephone number length. Specifies

the number of digits associated with internal extension

numbers by the algorithm that dials calls from the

incoming Call Log. Range: 1 or 2 digits, from “3” to “13.”

PHNIC 011 Telephone international access code. The maximum

number of digits, if any, dialed to access public network

international trunks by the algorithm that dials calls from

the incoming Call Log. Range: 0-4 digits.

PHNLD 1 Telephone long distance access code. The digit, if any,

dialed to access public network long distance trunks.

Range: 1 digit (0 to 9) or " " (Null). Needed for "Enhanced

Local Dialing Algorithm."

PHNLDLENGTH 10 Length of national telephone number. The number of

digits in the longest possible national telephone number.

Range: 5 to 15. Needed to for "Enhanced Local Dialing

Algorithm."

PHNOL 9 Outside line access code. The character(s) dialed,

including # and *, if any, to access public network local

trunks. Range: 0-2 dialable numeric digits, including " "

(Null).

PHY1STAT 1 Ethernet line interface setting (1=auto-negotiate,

2=10Mbps half-duplex, 3=10Mbps full-duplex,

4=100Mbps half-duplex, 5=100Mbps full-duplex, and

6=1000Mbps full-duplex if supported by the hardware).

PHY2PRIO 0 Layer 2 priority value for frames received on or forwarded

to the secondary Ethernet interface. Set this parameter

only when VLAN separation is "1" (enabled). Values are

from 0-7 and correspond to the drop-down menu

selection.

Table 9: Avaya Agent Deskphone 16CC Customizeable System Parameters (continued)

Parameter

Name

Default

Value

Description and

Value Range

9 of 13

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 117 118

Comentários a estes Manuais

Sem comentários

Avaya 16CC Guia do Utilizador Página 78

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya 16CC