Avaya 16CC Guia do Utilizador descarregar pdf (Página 51)

DHCP Server Administration

Issue 1 January 2008 51

Table 7: Parameters Set by DHCP

Parameter Description

HTTPDIR Specifies the path name to prepend to all file names used in HTTP GET

operations during startup. (0 to 127 ASCII characters, no spaces.) The command

is “GET HTTPDIR myhttpdir”. The path (relative to the root of the HTTP file

server) where 96xx telephone files are stored. If an Avaya file server is used to

download configuration files over TLS, but a different server is used to download

software files via HTTP, set the path of the Avaya server in the DHCP

site-specific option, and set HTTPDIR again in the 46xxsettings.txt file with the

appropriate path for the second server. HTTPDIR is the path for all HTTP

operations.

HTTPPORT Destination port for HTTP requests (0-65535, default is 80).

HTTPPROXY IP or DNS address of the HTTP server for SCEP. 0 to 255 characters in dotted

decimal or DNS name format followed by a colon and port number. The colon

and port number are optional. If this parameter is not null, this (proxy) transport

address is used to set up the HTTP connection as the transport protocol for

SCEP.

HTTPSRVR IP Address(es) or DNS name(s) of HTTP file server(s) used to download

telephone files.

ICMPDU Controls the extent to which ICMP Destination Unreachable messages are sent

in response to messages sent to closed ports so as not to reveal information to

potential hackers. The default is 1 (sends Destination Unreachable messages for

closed ports used by traceroute).

ICMPRED Controls whether ICMP Redirect messages are processed. The default is 0

(redirect messages are not processed).

L2Q 802.1Q tagging mode. The default is 0 (automatic).

L2QVLAN VLAN ID of the voice VLAN. The default is 0.

LOGSRVR Syslog server IP or DNS address.

MTU_SIZE Maximum transmission unit size. Used to accommodate older Ethernet switches

that cannot support the longer maximum frame length of tagged frames (since

802.1Q adds 4 octets to the frame).

PHY1STAT Controls the Ethernet line interface speed. The default is 1 (auto-negotiate).

PHY2STAT Controls the secondary Ethernet interface speed. The default is 1

(auto-negotiate).

PROCPSWD Security string used to access local procedures. The default is 27238.

PROCSTAT Controls whether local procedures are enabled. The default is 0 (enabled).

SIPPROXYSRVR SIP proxy/registrar server IP or DNS address. (0 to 255 characters; zero or one

IP Address in dotted decimal or DNS name format, separated by commas

without any intervening spaces.) The default is null.

SNTPSRVR List of SNTP server IP or DNS address(es) used to retrieve date and time via

SNTP

TLSDIR Used as path name that is prepended to all file names used in HTTPS get

operations during initialization (0-127 character string).

TLSPORT Destination TCP port used for requests to https server (0-65535). The default is

443.

TLSSRVR IP Address(es) or DNS name(s) of Avaya file server(s) used to download

configuration files.

Note: Transport Layer Security is used to authenticate the server.

VLANTEST Number of seconds to wait for a DHCPOFFER on a non-zero VLAN. The default

is 60 seconds.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 117 118

Comentários a estes Manuais

Sem comentários

Avaya 16CC Guia do Utilizador Página 51

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya 16CC