Avaya R2 Guia do Utilizador descarregar pdf (Página 70)

4-6 Configuring BCMS Vu from the Server

Configuring and Managing the BCMS Vu Software

5. In the “Mode of Connection:” group box, choose the “TCP/IP” or the “Data

Module” radio button. If you choose the “TCP/IP” option, the “Host Name/IP

Address:” and “Port:” boxes are enabled and the “Phone Number:” and “Serial

Port:” are disabled. If you choose the “Data Module option,” the “Phone

Number:” and “Serial Port:” boxes are enabled and the “Host Name/IP

Address:” and “Port:” boxes are disabled.

6. If you choose the “TCP/IP” option, follow Steps “a” and “b,” and go to Step 8.

a. Complete the “Host Name/IP address:” box. Type the Host Name or the IP

address of the DEFINITY system to which you are connecting.

b. Complete the “Port:” box. The “port” is the port on the switch to which

TCP/IP sockets will bind to initiate communications to the switch. For the

DEFINITY ONE system, port “22” must be used.

7. If you choose the “Data Module” option, follow Steps “a” and “b.”

a. Use the drop-down list for the “Serial Port:” box to select the serial port that

you are using to connect to the data module, if the data module option is

chosen. The serial ports that are available in the drop-down list will match

the ports available on your PC. If you do not know which serial (COM) port

to choose, look at the back of your PC for the port (1 through 8) to which the

data module is connected.

b. In the “Phone Number:” box type the hunt group extension for Netcon

channels that must be dialed for the data module to connect to the

DEFINITY system.

8. Select Next.

In the window that appears you will see a diagram showing the path to the

DEFINITY system you are trying to connect to. Select Test Connection to

confirm that the connection has been properly set up.

A colored dot moves back and forth between the PC icon and the DEFINITY

system icon.

Note

If you are configuring for the first time, then the “TCP/IP” radio

button is selected by default. Otherwise the option that was used

the previous time is selected.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 267 268

Sem comentários

Avaya R2 Guia do Utilizador Página 70