Avaya BCM 2.5 IP Telephony Guia de Configuração Página 72
- Página / 128
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
72 Chapter 4 VoIP Trunk Configuration
P0937663 02.0
• Private IP address: 10.10.5.1
• Public IP address: 47.62.84.1
• Phones 321-331
• From this system, dial 9 to get onto PSTN
On Business Communications Manager Ottawa
This procedure details actions that the installer performs to set up the Business Communications
Manager Ottawa.
1 The installer obtains keycodes for eight VoIP lines, and inputs the keycodes into the system.
Each Business Communications Manager has 10 phones, VoIP lines are available for eight
phones, but if all 10 phones try to place or receive VoIP calls at the same time, two of the calls
will be rerouted to the PSTN. The installer sets up 221 as the Control set for each line, so that
the VoIP schedule can be manually activated. This setup is necessary for PSTN fallback.
2 The installer sets the published IP address.
Because the public IP network is connected to the LAN 2 connection, the installer sets the
published IP address to LAN 2. This is the address that devices on the Packet Data Network
(PDN) will use to locate the system.
3 The installer configures the media for the system, using the following settings:
• The first preferred codec is set to G.729. The installer chooses this setting due to the
unique requirements of this installation.
• Silence Compression is turned on.
• Jitter Buffer is set to medium.
4 The installer puts eight VoIP lines into line pool O. Any line pool can be used as long as all of
the lines in the pool are VoIP. The installer does not set an access code for the line pool,
because the access code does not work with fallback. Instead, the line pool will be accessed
using destination digits after the installer sets up PSTN fallback.
5 For each telephone on the system (DNs 221 to 231), the installer gives the DN access to line
pool O.
6 The installer sets up a remote gateway for the Santa Clara Business Communications Manager,
using the following settings:
• Destination IP: 47.62.84.1 This is the published IP address of the Santa Clara Business
Communications Manager.
• QoS Monitor: Enabled This must be enabled for PSTN fallback to function.
• Transmit Threshold: 3.0 This is a Mean Opinion Score (MOS) value that ensures that the
VoIP lines are used as long as the system can provide moderate quality.
• Receive Threshold: 3.0 This is a MOS value that ensures that the VoIP lines are used as
long as the system can provide moderate quality.
• Destination Digits: 44 This means that callers dial ‘44’ to call phones on the Santa Clara
Business Communications Manager after dialing the destination digit.
7 The installer sets up a schedule called VoIP with these settings:
- Business Communications 1
- Manager 2.5 1
- IP Telephony Configuration 1
- Trademarks 2
- Contents 3
- Chapter 4 4
- Chapter 5 5
- Appendix A 5
- Before you begin 13
- Symbols used in this guide 14
- Text conventions 14
- Acronyms 15
- UDP User Datagram Protocol 16
- WAN Wide Area Network 16
- Related publications 17
- How to get help 18
- Chapter 1 19
- Introduction 19
- The IP telephony network 20
- Chapter 1 Introduction 21 21
- Figure 1 Network diagram 21
- Telephones 22
- IP Network 22
- Key IP Telephony Concepts 23
- Jitter Buffer 24
- QoS routing 24
- Chapter 1 Introduction 25 25
- 26 Chapter 1 Introduction 26
- Chapter 2 27
- Prerequisites checklist 27
- Network assessment 28
- Resource Assessment 28
- Keycodes 29
- IP Telephones 30
- Chapter 3 31
- Installing IP Telephones 31
- Choosing a codec 33
- Choosing a Jitter Buffer 33
- Before Installing 34
- Manual Cfg DHCP(0 no, 1 yes) 35
- Configuring DHCP 38
- Figure 4 DHCP summary 39
- Figure 5 DHCP range 40
- Figure 6 IP Terminal status 41
- Figure 7 Configuration menu 42
- Figure 9 IP Terminal Status 43
- Download Pending 44
- Deregistering offline DNs 45
- Moving IP telephones 46
- H.323 devices 47
- 4 Click the Save button 49
- VoIP Trunk Configuration 51
- Configuring media parameters 53
- Configuring codecs 54
- Setting Silence Compression 54
- Setting Jitter Buffers 55
- Outgoing call configuration 56
- Figure 21 Trunk/Line data 57
- Figure 22 Line pool 58
- Configuring a remote gateway 59
- Configuring PSTN fallback 60
- Setting up a VoIP schedule 61
- Vo I P 62
- Configuring routes 63
- Figure 28 Route list 64
- Figure 29 Add route dialog 64
- Creating a destination code 65
- Figure 32 Normal schedule 66
- Configuring digits 67
- Activating the VoIP schedule 67
- Turning on QoS monitor 68
- Incoming call configuration 70
- Example configuration 71
- Making calls 74
- Connecting an i200X telephone 75
- Quality of Service Monitor 77
- Port settings 77
- Using firewalls 78
- Using a gatekeeper 80
- Gatekeeper call scenarios 82
- Typical applications 85
- MCDN functionality 86
- Networking 91
- Network Engineering 92
- Networking 93 93
- (64 kb/s) 93
- (5.3 kb/s) 93
- LAN Engineering Examples 95
- WAN engineering 96
- Setting Non-linear processing 96
- Networking 97 97
- Traceroute 97
- Enough link capacity 98
- Not enough link capacity 98
- Implementing the network 99
- Further network analysis 99
- Reduce link delay 100
- Reducing hop count 100
- Adjust the jitter buffer size 101
- Reduce packet errors 101
- Routing issues 102
- Silence compression 103
- Appendix B 103
- 104 Silence compression 104
- P0937663 02.0 104
- Silence compression 105 105
- 106 Silence compression 106
- Silence compression 107 107
- Comfort Noise 108
- Appendix C 109
- Network Performance Utilities 109
- Appendix D 111
- Interoperability 111
- Speech Path Setup Methods 112
- Media Path Redirection 112
- Gatekeeper 113
- Symbol Telephones 114
- Appendix E 115
- Quality of Service 115
- Measuring Intranet QoS 116
- Recording routes 117
- Adjustment for processing 118
- Late packets 118
- Quality of Service 119 119
- Traffic mix 120
- Network Quality of Service 121
- Packet loss 122
- Packet delay 122
- Delay variation (jitter) 123
- 124 Quality of Service 124
- Glossary 125
- 126 Glossary 126
Manuais e produtos relacionados com Gateways/controladores Avaya BCM 2.5 IP Telephony
(35 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.057 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais