Avaya Configuring SNMP, RMON, BOOTP, DHCP, and RARP Services Manual do Utilizador Página 129

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 192
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 128
Customizing BootP
117362-A Rev. A 5-3
By default, the maximum number of hops a packet can take from the source
device to the destination device (client to server) is 4. If the value in the hops field
of a BOOTREQUEST packet is greater than the value specified for the max-hops
parameter, the router drops the packet.
To specify the maximum number of hops from client to server, complete the tasks
in the following table.
Specifying a Minimum Timeout Value
By default, the router immediately forwards BOOTREQUEST packets to the
destination address in the BootP relay forwarding table. You can determine the
amount of time (in seconds) that the router waits before forwarding a
BOOTREQUEST packet out an interface by assigning a value to the Timeout
Secs. parameter. If the value in the seconds field of a BOOTREQUEST packet is
less than the value you specified for the Timeout Secs. parameter you configured
on the interface, the router drops the packet.
The default value is 0 seconds. To change the default, specify a value from 1 to
65535 seconds.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose IP. The IP menu opens.
3. Choose BOOTP. The BOOTP menu opens.
4. Choose Relay Agent Interface Table. The BOOTP Relay Agent Interface Table
window opens. This window lists all the IP
interfaces that you have configured for
BOOTP services on the router.
5. Set the Hops
parameter.
Click on Help or see the parameter
description on page
A-20.
6. Click on Apply.
7. Click on Done. You return to the Configuration Manager
window.
Vista de página 128
1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 191 192

Comentários a estes Manuais

Sem comentários