
Configuring Bandwidth-on-Demand Circuits
114062 Rev. A
10-13
2.
Enter values for the parameters according to the descriptions in the next
section.
3.
Click on OK to save your changes.
Congestion Monitor Parameters
Although Site Manager provides default values for these parameters, edit them for
your network applications. If the network is critical to your operations and you
want to ensure expedient data transmission, you want to customize your threshold
values so that even with moderate congestion, the router brings up additional
lines. Do not forget to account for data compression.
The cost of using additional lines also may affect how often you want the router to
activate them.
Parameter: Bandwidth-on-Demand Pool ID
Default: None
Range: 1 to 255
Function: Identifies an existing bandwidth pool.
Instructions: Enter the ID number for the bandwidth pool you want the circuit to use.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.4.5.1.35
Note:
Properly configuring the Preferred Bandwidth Slot and Reserved
Bandwidth Slot parameters depends on the slots that each pool uses, and
whether there are Monitor circuits already in the pool. Refer to the parameter
descriptions for details.
Note:
You can set the threshold parameters only if you set the PPP Circuit
Mode to Multilink Monitor.
Comentários a estes Manuais