Avaya Using Technician Interface Scripts Manual do Utilizador descarregar pdf (Página 719)

100

101

303560-A Rev 00

2-671

ft1_state

Displays information about the operational state of the FT1/T1 DSU/CSU adapter module.

The display includes the following information:

Slot Slot identifier; always 1 for the ARN.

Conn Connector identifier; ranges from 1 to 2.

Port State State of the port associated with the FT1/T1 line, as follows:

•

Red Alarm

- A red alarm signal, indicating the loss of T1 framing.

•

Yellow Alarm

- A yellow alarm signal from the T1 network

indicating that the remote T1 interface is out-of-frame.

•

Loopback

- Port is in loopback mode.

•

- Port is synchronized with the T1 network.

•

AIS

- A blue alarm signal from the T1 network indicating a total

loss of signal from the remote T1 device.

Loopback State Defines the loopback state of the port, as follows:

• Line Loopback

- Loops received data back onto the T1

transmission path at the point where the T1 interface enters the

FT1/T1 DSU/CSU adapter module.

• Payload Loopback

- Detects and encodes an ANSI Bit-Oriented

Payload Loopback message or an AT&T Payload Loopback

message across the T1 Facility Data Link (FDL). Upon detection

of a Payload Loopback message, the FT1/T1 DSU/CSU adapter

module transmits the received information in the outgoing

direction.

• No Loop -

No loopback is configured on the FT1/T1 DSU/CSU

adapter module.

1 2 ... 714 715 716 717 718 719 720 721 722 723 724 ... 891 892

Comentários a estes Manuais

Sem comentários

Avaya Using Technician Interface Scripts Manual do Utilizador Página 719

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya Using Technician Interface Scripts