
Using Translation Bridge Services
114060 Rev. A 4-17
Translation Bridge Global Parameter Descriptions
Use these parameter descriptions as a guide when you configure the parameters in
the Edit Translation Bridge Global Parameters window (refer to Figure
4-5).
Parameter: Enable
Default: Enable
Options: Enable
| Disable
Function: Toggles on and off the translation bridge for the router.
Instructions: Set to Disable to turn off translation bridging for the entire router.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.2.11.2
Parameter: Virtual LAN ID
Default: 0x0
Range: 0x1 to 0x0fff
Function: Assigns the transparently bridged network a ring number. To stations on
the source routing network, the entire transparently bridged network
appears to be one additional network segment or ring, identified by this
ring number. When the SR bridge receives a frame destined for this ring
number, it passes it to the translation bridge.
Instructions: Specify a ring number that is not already being used by the source routing
network. The number you use should not be the same as any LAN ID,
group LAN ID, or internal LAN ID number that is configured on any of
the SR bridges on the network. We recommend that you configure the
same ring number on all translation bridges on the network.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.2.11.3
Comentários a estes Manuais