Avaya Configuring Bridging Services Manual do Utilizador Página 103

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 210
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 102
Using Source Routing Bridge Services
114060 Rev. A 2-43
Parameter: IP Address
Default: None
Options: Any valid IP address
Function: Shows the IP address of this interface. (If there is no IP address, this field
displays 0.0.0.0.)
You can use this parameter with the IP Encapsulation parameter to map
ring IDs to IP addresses.
Instructions: If you accept the IP address displayed, then the ring ID maps to that
address.
If you want to change the ring ID mapping to the outgoing IP interface,
enter 0.0.0.0 at this field.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.2.2.1.10.
Parameter: WAN Broadcast Address
Default: -1
Options: Any valid Frame Relay data link connection identifier (DLCI) number
Function: Sets the DLCI number this interface uses when it sends broadcast frames
over Frame Relay.
Instructions: Specify a DLCI number.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.2.2.1.23
Note: If you did not configure IP on this interface already, the system will
overwrite the value you entered for this parameter when you do configure IP.
Note: You cannot modify the WAN Broadcast Address parameter unless you
first configure source routing over Frame Relay, ATM, or SMDS.
Vista de página 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 209 210

Comentários a estes Manuais

Sem comentários