Avaya Configuring IP, ARP, RIP, and OSPF Services Manual do Utilizador descarregar pdf (Página 301)

Site Manager Parameters

117356-E Rev 00

A-61

Parameter: Dead Interval

Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Virtual Interfaces

Default: 60 seconds

Options: 1 to 2000 seconds

Function: Indicates the number of seconds that a router’s Hello packets have not been

seen before its neighbors declare the router down. This value should be some

multiple of the Hello interval. Bay Networks suggests the following values for

this parameter: for broadcast, 40 seconds; for point-to-point, 60 seconds; for

NBMA, 80 seconds; for point-to-multipoint, 60 seconds.

Instructions: Either accept the default value of 60 seconds, or enter another value for this

parameter. This value must be the same for all routers attached to the same

network.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.7.1.9

Parameter: Password

Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Virtual Interfaces

Default: None

Options: Any ASCII text string up to eight characters long

Function: Specifies the password used for this area. You can specify a password up to eight

ASCII characters in length that will appear in the authentication field of all OSPF

packets across this interface. This parameter is valid only when the

Authentication Type parameter for the area is set to Simplepassword.

Instructions: Enter the appropriate password. All routers in the same area must either have no

authentication or have the same password.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.7.1.10

1 2 ... 296 297 298 299 300 301 302 303 304 305 306 ... 361 362

Sem comentários

Avaya Configuring IP, ARP, RIP, and OSPF Services Manual do Utilizador Página 301