Avaya Configuring IP, ARP, RIP, and OSPF Services Manual do Utilizador descarregar pdf (Página 280)

Configuring IP, ARP, RIP, and OSPF Services

A-40

117356-E Rev 00

OSPF Interface Parameters

Parameter: RFC 1583 Compatibility Enable

Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Global

Default: Enabled

Options: Enabled

Disabled

Function: Controls the preference rules used when choosing among multiple AS external

LSAs advertising the same destination.

Instructions: Set this parameter to Enabled to use the preference rules specified by RFC 1583.

Set this parameter to Disabled to use the preference rules specified in RFC

2178, which prevent routing loops when AS external LSAs for the same

destination originate from different areas.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.1.25

Parameter: Enable

Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Interfaces

Default: Enable

Options: Enable

Disable

Function: Indicates whether or not OSPF is enabled on this interface. The default

value, Enable, indicates that neighbor relationships may be formed on this

interface, and that this interface will be advertised as an internal route to

some area. The value Disable indicates that this is not an OSPF interface.

Instructions: Set this parameter to Disable if you do not want OSPF enabled on the

interface. Set it to Enable if you previously disabled OSPF on this interface

and now want to reenable it.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.5.1.2

1 2 ... 275 276 277 278 279 280 281 282 283 284 285 ... 361 362

Sem comentários

Avaya Configuring IP, ARP, RIP, and OSPF Services Manual do Utilizador Página 280