Avaya Configuring IP, ARP, RIP, and OSPF Services Manual do Utilizador descarregar pdf (Página 144)

100

101

Configuring IP, ARP, RIP, and OSPF Services

5-14

117356-E Rev 00

Receiving RIP Updates on an Interface

By default, RIP listens for routing updates on every interface on which it is

enabled.

You can use the BCC or Site Manager to disable and reenable this feature as

required.

Using the BCC

To specify whether RIP listens for routing updates, navigate to a RIP interface

prompt (for example,

box; eth 2/2; ip/2.2.2.2/255.255.0.0; rip

) and enter:

listen

<state>

state

is one of the following:

enabled

(default)

disabled

For example, the following command causes RIP to stop listening for updates on

IP interface 2.2.2.2:

rip/2.2.2.2#

listen disabled

rip/2.2.2.2#

Note:

If you enable this feature, a configured policy can still prohibit the

interface from updating its internal routing table.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 361 362

Comentários a estes Manuais

Sem comentários

Avaya Configuring IP, ARP, RIP, and OSPF Services Manual do Utilizador Página 144

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya Configuring IP, ARP, RIP, and OSPF Services