Avaya Configuring IP, ARP, RIP, and OSPF Services Manual do Utilizador descarregar pdf (Página 190)

100

101

Configuring IP, ARP, RIP, and OSPF Services

6-20

117356-E Rev 00

Configuring an Area ID

In an AS that contains multiple areas, each OSPF interface is configured with the

ID of the area to which it is connected.

You supply an area ID when you add OSPF to the interface. You can use the BCC

or Site Manager to assign a different area ID to the interface.

Using the BCC

To change an area ID, navigate to the OSPF interface prompt (for example,

box;

eth 2/2; ip/2.2.2.2/255.255.0.0; ospf

) and enter:

area

area_id>

area_id

is an area identifier in dotted-decimal format.

For example, the following command assigns area ID 0.0.0.2 to interface 2.2.2.2.

(This means that interface 2.2.2.2 connects the router to a network in OSPF area

0.0.0.2.)

ospf/2.2.2.2#

area 0.0.0.2

ospf/2.2.2.2#

Using Site Manager

To change an area ID for an OSPF interface, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

OSPF/MOSPF

. The OSPF/MOSPF menu opens.

4. Choose

Interfaces

. The OSPF Interfaces window opens.

5. Click on the interface that you want to edit. The parameter values for that interface

appear in the OSPF Interfaces window.

(continued)

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 361 362

Comentários a estes Manuais

Sem comentários

Avaya Configuring IP, ARP, RIP, and OSPF Services Manual do Utilizador Página 190

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya Configuring IP, ARP, RIP, and OSPF Services