Avaya Configuring IP, ARP, RIP, and OSPF Services Manual do Utilizador descarregar pdf (Página 200)

Configuring IP, ARP, RIP, and OSPF Services

6-30

117356-E Rev 00

Using Site Manager

To set the Hello interval, complete the following tasks:

Setting the Dead Interval

The dead interval is the number of seconds that OSPF waits to receive a Hello

packet from a neighbor before considering the neighbor to be down. The dead

interval value should be some multiple of the Hello interval value.

Each type of network has an optimum dead interval. If the interface is connected

to a broadcast network, you should use the default setting -- 40 seconds. Table 6-5

lists the suggested settings for network types supported by OSPF.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

OSPF/MOSPF

. The OSPF/MOSPF menu opens.

4. Choose

Interfaces

. The OSPF Interfaces window opens.

5. Click on the OSPF interface that you want

to edit.

The parameter values for that interface

appear in the OSPF Interfaces window.

6. Set the

Hello Interval

parameter. Click on

Help

or see the parameter description on

page A-43

7. Click on

Apply

, and then click on

Done

. You return to the Configuration Manager

window.

Table 6-5. Dead Interval Settings

Network Type Suggested Dead Interval (seconds)

Broadcast 40 (default)

Point-to-point 60

NBMA 80

Point-to-multipoint 60

1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 361 362

Comentários a estes Manuais

Sem comentários

Avaya Configuring IP, ARP, RIP, and OSPF Services Manual do Utilizador Página 200

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya Configuring IP, ARP, RIP, and OSPF Services