Avaya Configuring TDM Services Manual do Utilizador Página 28

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 58
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 27
Configuring TDM Services
2-8
309426-14.10 Rev 01
encapsulation_type
is the data encapsulation type that you want the PVC
service record to use.
When configuring a CES H.110 TDM circuit, you must define an ATM
service record that uses null encapsulation.
For example, the following command defines a PVC service record with the
name “ces1422” and that uses null encapsulation on ATM slot 1, pci-slot 1,
module 2, connector 1:
atm/5/1# pvc-service service-name ces1422 encapsulation null
pvc-service/ces1422#
4.
Add an ATM PVC to the PVC service record.
To add a PVC to a PVC service record, navigate to the ATM PVC service
record prompt (for example,
box#;atm/1/1/2/1;pvc-service/ces1422), and
enter:
pvc vpi
<vpi_number>
vci
<vci_number>
vpi_number
identifies the virtual path of the PVC. The header can contain a
maximum of 8 VPI bits for a UNI connection. This bit range allows for path
identifiers from 0 to 255.
vci_number
identifies the virtual channel of the PVC. The header can contain
a maximum of 16 VCI bits. This bit range allows for channel identifiers from
32 to 65535.
For example, the following command adds PVC 32/33 to the configuration on
PVC service record ces1422:
pvc-service/ces1422# pvc vpi 32 vci 33
pvc/32/33#
5.
Set the AAL encapsulation type of the ATM PVC to AAL 1.
To set the AAL encapsulation type to AAL 1, navigate to the ATM PVC
prompt (for example,
box#;atm/1/1/2/1;pvc-service/ces1422;pvc/32/33),
and enter:
aal-type aal1
6.
Set the service category of the ATM PVC to constant bit rate (CBR).
Note:
Following the recommendation of the ATM Forum, virtual channel
identifiers from 0 to 31 are reserved for signaling and added functionality.
Vista de página 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 57 58

Comentários a estes Manuais

Sem comentários