
Customizing TDM
309426-14.10 Rev 01
2-7
For example, to create an entry for the first dual synchronous connector
located at slot 1, pci-slot 4, module 2, connector 2, enter:
box# dsync slot 1 pci-slot 4 module 2 connector 2
dsync/1/4/2/2#
2.
Create an entry for an ATM T1/E1 connector.
Next, navigate to the box prompt (for example,
box#) to add ATM to the
configuration so that you can connect an ATM PVC to the dual synchronous
connector, and enter:
atm slot
<slot_number>
pci-slot
<pci_slot_number>
module
<module_number>
connector
<connector_number>
mode
<mode>
To add ATM to the configuration, navigate to the top-level prompt and enter:
atm slot
<slot_number>
pci-slot
<pci_slot_number>
module
<module_number>
connector
<connector_number>
slot_number
is the number of the chassis slot containing the link module.
pci_slot_number
is the pci-slot number of the ATM-E1/ATM-T1 line. The pci
slot number for the ATM router is always 1.
module_number
is a convention used within the Passport 5430 or System
5000 chassis. You need only enter a module number when configuring an
ATM router in the Passport 5430 or System 5000 chassis (that is, the Model
5782 Centillion Multiprotocol Engine). The module number for the ATM
router is always 1.
connector_number
is the number of a connector on the link module
mode
is the frequency mode you want to use, either T1 or E1.
For example, to create an ATM entry at slot 1, pci-slot 1, module 2,
connector 1, using the T1 mode, enter:
box# atm slot 1 pci-slot 1 module 2 connector 1 mode t1
atm/1/1/2/1#
3.
Define an ATM PVC service record.
To define an ATM PVC service record, navigate to the ATM interface prompt
(for example,
box#;atm/1/1/2/1) and enter:
pvc-service
<service_name>
encapsulation
<encapsulation_type>
service_name
is a unique text string that you assign to the service record.
Comentários a estes Manuais