
Configuring IP Utilities
1-2
304234-A Rev 00
Starting Configuration Tools
Before configuring TCP, FTP, TFTP, Telnet, NTP, DNS, and NetBIOS over IP
services, refer to the following user guides for instructions on how to start and use
the Bay Networks configuration tool of your choice.
These guides also describe generically how to create or modify a device
configuration.
Configuring IP for Global Protocols
Before you configure TCP, FTP, TFTP, Telnet, NTP, DNS, or NetBIOS over IP
using the BCC or Site Manager, you must first start IP on the router.
Using Site Manager
Before you can select a protocol to run on the router, you must configure a circuit
that the protocol can use as an interface to an attached network. For information
and instructions, see Configuring WAN Line Services and Configuring Ethernet,
FDDI, and Token Ring Services.
When you have successfully configured the circuit, the Select Protocols window
opens. Proceed as follows:
Configuration Tool User Guide
Bay Command Console (BCC)
Using the Bay Command Console (BCC)
Site Manager
Configuring and Managing Routers with
Site Manager
Comentários a estes Manuais