
Configuring IP Utilities
8-2
304234-A Rev 00
Disabling and Reenabling NetBIOS
When you start NetBIOS on the router, NetBIOS is automatically enabled.
To disable or reenable NetBIOS over IP, complete the following tasks:
Specifying a TTL Value for a Rebroadcast Packet
The TTL value restricts the number of routers a rebroadcast packet can traverse.
To prevent NetBIOS broadcast packets from traversing the network indefinitely,
set the parameter to a minimal value.
By default, NetBIOS sets the TTL value in each packet to 5. You can use Site
Manager to set a TTL value from 1 to 255.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
Choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
NetBIOS
. The NetBIOS menu opens.
4. Choose
Global
. The Edit NetBIOS/IP Global Parameters
window opens.
5. Set the
Enable
/
Disable
parameter. Click
on
Help
or see the parameter description
on page A-24
.
6. Click on
OK
. You return to the Configuration Manager
window.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
Choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
NetBIOS
. The NetBIOS menu opens.
(continued)
Comentários a estes Manuais