Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual do Utilizador descarregar pdf (Página 41)

100

101

Starting BGP and EGP Services with Site Manager

308628-14.00 Rev 00

3-5

When you have successfully configured the circuit, the Select Protocols window

opens. Complete the steps in the following table:

Site Manager Procedure

You do this System responds

1. In the Select Protocols window, select the

following protocols:

•

EGP

Then click on

The IP Configuration window opens.

2. Set the following parameters:

•

IP Address

•

Subnet Mask

•

Transmit Bcast Addr

•

UnNumbered Assoc Address

Click on

Help

or see the parameter

descriptions beginning on page A-28.

3. Click on

. The EGP Configuration window opens.

4. Set the following parameters:

•

Local Autonomous System ID

(decimal)

•

Remote Peer IP Address

•

Gateway Mode

Click on

Help

or see the parameter

descriptions beginning on page A-24.

5. Click on

. Site Manager enables EGP service, and

returns you to the Configuration Manager

window.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 307 308

Comentários a estes Manuais

Sem comentários

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual do Utilizador Página 41

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP)