Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual do Utilizador descarregar pdf (Página 178)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

A-2

308628-14.00 Rev 00

BGP Configuration Parameters

BGP Global Parameters

Parameter: Identifier

Path: Choose BGP in the Select protocols window.

Default: None

Options: An IP address of an IP interface on this router

Function: Identifies the BGP router. There is no default for this parameter. You must use

an IP address of one of the router’s IP interfaces.

Instructions: Either accept the current BGP identifier or enter a new IP address. The BGP

identifier must be one of the router’s IP interfaces. If both BGP and OSPF are

running on the router, then the OSPF router ID must be equivalent to one of the

configured IP interfaces.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.4

Parameter: Local AS

Path: Select BGP in the Select protocols window.

Default: None

Options: 1 to 65,535

Function: Identifies the autonomous system to which this BGP router belongs.

Instructions: Enter a value from 1 to 65,535.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.5

Parameter: BGP Enable

Path: Configuration Manager > Protocols > IP > BGP > BGP Global

Default: Enable

Options: Enable

Disable

Function: Globally enables or disables BGP on all router interfaces.

Instructions: Set to Disable if you want to disable BGP for the entire router. Set to Enable if

you previously disabled BGP and now want to reenable it.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.2

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 307 308

Sem comentários

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual do Utilizador Página 178