Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual do Utilizador Página 223

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 308
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 222
Site Manager Parameters
308628-14.00 Rev 00
A-47
Parameter: Zero Subnet Enable
Path: Configuration Manager > Protocols > IP > Global
Default: Disable
Options: Enable
|
Disable
Function: Specifies whether an interface address whose subnet portion is all zeros or all
ones should be declared legal or not. If you set this parameter to Enable, then
you can configure IP interfaces with a subnet ID of zero. Setting this parameter
to Disable prevents you from doing so.
Instructions: Accept the default, Disable, if you do not have any interfaces that have a zero
subnet ID. Otherwise, reset this parameter to Enable. The use of all-zero subnet
addresses is discouraged for the following reason: if an all-zero subnet address
and an all-zero broadcast address are both valid, the router cannot distinguish
an all-subnets broadcast from a directed broadcast for the zero subnet.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.1.10
Parameter: Estimated Networks
Path: Configuration Manager > Protocols > IP > Global
Default: 0
Options: 0 to 2,147,483,647
Function: Allows the IP software to preallocate system resources based on the anticipated
size of the routing table. Preallocation of memory increases the speed with
which IP software can learn routes because it removes the overhead caused by
dynamic memory allocation. Preallocation also makes better use of memory
and reduces the amount of memory required.
Instructions: Set to the number of networks (including unique subnets) that you expect.
Avoid using a number that is excessively large. This will cause a wasteful
overallocation of memory. If you use the default value, 0, IP software
preallocates memory for 500 routing table entries.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.1.11
Vista de página 222
1 2 ... 218 219 220 221 222 223 224 225 226 227 228 ... 307 308

Comentários a estes Manuais

Sem comentários