Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual do Utilizador descarregar pdf (Página 157)

Configuring Route and Traffic-Load Balancing

308628-14.00 Rev 00

9-5

Using Site Manager

Configuring EBGP for Route and Traffic-Load Balancing

EBGP route balancing and traffic-load balancing are two techniques that allow an

EBGP speaker to distribute routes to the same destination among multiple

equal-cost paths.

In both techniques, EBGP uses equal cost multipath (ECMP) routes submitted

statically to the IP routing table. (Although unusual for EBGP connections, the

ECMP routes could also be submitted by OSPF or RIP.) For information about

ECMP routing, see Chapter 4, “Configuring and Customizing IP for BGP

.”

You can configure an EBGP speaker to use ECMP static routes in the IP routing

table for route balancing and traffic-load balancing.

The following conditions must apply:

• The local BGP router and the remote BGP router must be connected by

multiple links.

• IP must be configured on a circuitless interface on both the local and remote

routers.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BGP

. The BGP menu opens.

4. Choose

BGP Global

. The Edit BGP Global Parameters window

opens.

5. Set the

IBGP ECMP Method

parameter.Click on

Help

or see the

parameter descriptions beginning on page

A-8

6. Click on

. Site Manager returns you to the

Configuration Manager window.

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 307 308

Comentários a estes Manuais

Sem comentários

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual do Utilizador Página 157

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP)