Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual do Utilizador descarregar pdf (Página 212)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

A-36

308628-14.00 Rev 00

Parameter: TR Endstation

Path: Configuration Manager > Protocols > IP > Interfaces

Default: Off

Options: On

Off

Function: Specifies source routing over token ring selection.

Instructions: Use the On option to enable the parameter.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.24.1.19

Parameter: Redirect

Path: Configuration Manager > Protocols > IP > Interfaces

Default: Enable

Options: Enable

Disable

Function: Indicates whether this interface sends out ICMP redirects. ICMP redirects are

messages sent by the router to alert a host that it should be using a different path

to route data.

Instructions: Reset to Disable if you do not want this interface to send out redirects. For

example, in a frame relay network, two stations on the same network may not be

directly connected if the network is not fully meshed. Thus, in this case, you

would set the Redirect parameter to Disable.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.24.1.25

1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 307 308

Sem comentários

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual do Utilizador Página 212