Avaya Configuring DLSw Services Manual do Utilizador descarregar pdf (Página 87)

Enabling DLSw Services

4-13

The ﬁrst DLSw SAP Conﬁguration window reappears. Repeat the instructions

in this section as needed.

4. Click on Done.

The main Conﬁguration Manager window appears. You have now completed

your initial installation of DLSw. If you have not already conﬁgured the IP

addresses of the slots and connection to the IP network, add them now.

Parameter: SAP

Default: None

Options: An even-numbered SAP address (00, 04 to EC, F0) in hexadecimal

format

Function: Speciﬁes the destination service access point address (SAP) associated

with a communication subsystem on a remote device (for example, on a

PC or host).

Instructions: Begin the address with 0x and specify the SAP address associated with a

speciﬁc communication subsystem. The SAP entries for SNA are 0x04,

0x08, and 0x0C. The SAP entry for NetBIOS is 0xF0.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.4.1.2

Editing SDLC Line Parameters and SDLC Local Devices

To conﬁgure DLSw on synchronous interfaces (COM1, COM2, etc.) using the

SDLC protocol:

1. Select SDLC from the WAN protocols window.

The Conﬁguration Manager displays the SDLC Line Parameters window

(Figure 4-11).

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 203 204

Sem comentários

Avaya Configuring DLSw Services Manual do Utilizador Página 87