
Resolving Problems 10-27
Troubleshooting
Chapter 10
Close the Server, restart the
Server, and send a report to
the problem wallboard.
Wallboard display does
not change for several
minutes.
Server program has been
closed or Server PC has
been disconnected.
Reconnect Server PC
and/or restart Server
software.
Server cannot register
wallboard.
COM Port larger than 8
specified in “COM Port”
setting.
Use a COM Port number
from 1 through 8.
After you try to register
a wallboard, you select
Test Connection. You
do not see “Test
Message” on the
wallboard, even though
you are sure that the
wallboard is properly
connected and that you
entered the correct
matching name and
COM Port number.
Another Server is
accessing the wallboard.
Wait until the other Server
has finished accessing the
wallboard.
Ferrograph wallboards
only:
If wallboard is
disconnected while you
try to write to it, no
message is sent
reporting that the
wallboard can’t be
contacted.
Nature of Ferrograph
wallboard
None
Wallboard Problems
Problem Probable Cause Action
Comentários a estes Manuais