
Inbound Traffic Filter Criteria and Actions
308645-14.00 Rev 00
3-11
• Forward to First Up Next Hop Interface
Specifies that any frame that matches the filter will be forwarded to a
specified next-hop router or to a network connected to the router. If the
specified hop is not reachable, the filter tries all addresses on the next-hop
interfaces list using ARP messages. If none of the next-hop interfaces is
reachable, the router forwards packets that match the filter to the packet
destination address (unless you also specify Drop If Next Hop Is
Unreachable).
• Detailed Logging
For every packet that matches the filter criteria and ranges, the filter adds an
entry containing IP header information to the system Events log.
IPX Criteria and Actions
You filter inbound IPX traffic based on specified bit patterns in the IPX header.
Predefined IPX Criteria
Table 3-8 lists the predefined criteria for IPX inbound traffic filters, and the
reference field, offset, and length for each criterion.
Table 3-8. Predefined Criteria for IPX Inbound Traffic Filters
Criterion Name Reference Field Offset Length
Destination Network IPX_BASE 48 32
Destination Address IPX_BASE 80 48
Destination Socket IPX_BASE 128 16
Source Network IPX_BASE 144 32
Source Address IPX_BASE 176 48
Source Socket IPX_BASE 224 16
Comentários a estes Manuais