Avaya Configuring Traffic Filters and Protocol Prioritization Manual do Utilizador descarregar pdf (Página 116)

Configuring Traffic Filters and Protocol Prioritization

7-8

308645-14.00 Rev 00

4. Select High, Low, or Normal as the queue

in which a packet is placed if the length is

less than or equal to the value of Packet

Length.

For example, if Packet Length is set to 1024

bytes, any packet that is 1024 bytes or less is

placed in the queue you selected.

5. Click on

. The Values Selection window closes. The

Prioritization Length window now displays

the new value.

6. Select the Greater Than Queue field; then,

click on

Help

for information, or refer to the

description on page A-8 in Appendix A.

7. Click on

Values

. The Values Selection window opens.

8. Select High, Low, or Normal as the queue

in which a packet is placed if the length is

greater than the value of Packet Length.

9. Click on

. The Values Selection window closes. The

Prioritization Length window now displays

the new value.

10. Click on

. The Create Priority/Outbound Template

window opens, showing the newly

selected criterion, range, and action in

the Filter Information field (Figure 7-4)

11. Click on

. The Filter Template Management window

opens (Figure 7-3).

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 183 184

Sem comentários

Avaya Configuring Traffic Filters and Protocol Prioritization Manual do Utilizador Página 116