Avaya Configuring Traffic Filters and Protocol Prioritization Manual do Utilizador descarregar pdf (Página 113)

Applying Outbound Traffic Filters

308645-14.00 Rev 00

7-5

5. Choose Criteria > Add > Datalink

IP >

criterion

To configure filters for IP-routed packets,

always choose IP instead of Datalink. See

Chapter 4 for information about the

outbound traffic filter criteria for IP and data

link headers.

The Add Range window opens.

6. Specify the range to apply to the

selected criterion.

To enter a hexadecimal number, use the

prefix 0x. Zero is not a valid entry. If the

range consists of just one value, specify

that value in both fields. See Chapter 5 for

information about common traffic filter

ranges.

7. Click on

. The Create Priority/Outbound Template

window opens (Figure 7-4)

. The new

criterion and range appear in the Filter

Information field.

8. To add more ranges, choose Range >

Add.

You can add up to 100 ranges in each

template.

9. Choose Action > Add > Datalink

IP >

action

For a Datalink criterion, choose a Datalink

action; for an IP criterion, choose an IP

action.

If you selected the Length action, the

Prioritization Length window opens

(Figure 7-5)

. See “Specifying Prioritization

Length” on page 7-7 for instructions.

Otherwise, the Create Priority/Outbound

Template window opens, showing the

criteria, range, and action in the Filter

Information field.

10. Click on

. The Filter Template Management window

opens. The new template appears in the

templates list.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 183 184

Comentários a estes Manuais

Sem comentários

Avaya Configuring Traffic Filters and Protocol Prioritization Manual do Utilizador Página 113

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya Configuring Traffic Filters and Protocol Prioritization