Avaya Configuring Traffic Filters and Protocol Prioritization Manual do Utilizador descarregar pdf (Página 144)

Configuring Traffic Filters and Protocol Prioritization

B-4

303543-A Rev 00

Chapter 6 provides detailed procedures for creating inbound traffic filters and

traffic filter templates.

6. Click on

Create

. The Create Filter Template window for the

selected protocol opens.

7. Specify a descriptive name in the Filter

Name field.

8. Choose Criteria > Add >

criterion

See Ta ble B-1

or Ta bl e B- 2 for specific

examples.

The Add Range window opens.

(If you selected the User-Defined

criterion, the Add User-Defined Field

window opens first.)

9. Type a minimum and maximum value to

specify the range, then click on

See Table B-1

or Ta bl e B- 2 for specific

examples. To specify additional ranges,

choose Range > Add.

The Add Range window closes. The new

criterion and ranges now appear in the

Filter Information field of the Create Filter

Template window.

10.Choose Action > Add >

action

See Ta ble B-1

or Ta bl e B- 2 for specific

examples.

The action appears in the Filter

Information field.

11.Click on

. The Filter Template Management window

opens. The new template appears in the

templates list.

12.Click on

Done

. The Filters window opens.

13.Click on

Create

. The Create Filter window opens.

14.Specify a descriptive name in the Filter

Name field.

15.Select a template in the Templates field.

16.Select a circuit in the Interfaces field.

17.Click on

. The Filters window opens.

18.Click on

Apply

. The filter is applied to the circuit.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 161 162

Comentários a estes Manuais

Sem comentários

Avaya Configuring Traffic Filters and Protocol Prioritization Manual do Utilizador Página 144

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya Configuring Traffic Filters and Protocol Prioritization