Avaya Configuring IP Utilities Manual do Utilizador descarregar pdf (Página 57)

114071 Rev. A 5-1

Chapter 5

Customizing Telnet Services

This chapter describes how to create and customize Telnet Server and Telnet

Client on the router. You should have read Conﬁguring Routers or Conﬁguring

Customer Access and Trunks (BNX Software), as appropriate for your platform,

and have performed the following tasks:

1. Opened a conﬁguration ﬁle in local or remote mode

2. Selected the appropriate router type, speciﬁed a slot, and selected the link

or net module that you want to insert in the slot (if you are using a local

mode conﬁguration ﬁle)

3. Conﬁgured IP on an interface using the default parameters, as described

in Chapter 1

4. Created TCP in the Conﬁguration Manager window

5. Created Telnet Client or Telnet Server in the Conﬁguration Manager

window

You can create and enable Telnet services easily by using all the default parameter

values that the Conﬁguration Manager supplies.

If you decide to change some or all of the default parameters, refer to the

instructions in this chapter. For a list of Telnet parameters, see Appendix B.

Conﬁguring a Telnet Server on the Router

After you create a Telnet Server on the router for inbound Telnet sessions, as

described in Chapter 2, default values are in effect for all Telnet Server parameters

(see parameter descriptions in Appendix A). You may want to change these

parameter values, depending on the requirements of your network.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 95 96

Sem comentários

Avaya Configuring IP Utilities Manual do Utilizador Página 57