Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services Manual do Utilizador descarregar pdf (Página 327)

Site Manager Parameters

308627-14.20 Rev 00

A-65

Parameter: Time to Live

Path: Configuration Manager > Protocols > IP > RIP Interfaces

Default: 1

Options: 1 to 255

Function: Specifies a TTL value to be inserted in the IP header for RIP updates. Certain

RIP implementations ignore packets with a TTL value of one hop. Use this

parameter to provide interoperability with such implementations.

Instructions: Setting a TTL of 1 prevents RIP updates from inadvertently exiting the local

network. Increasing the TTL introduces the risk of the update exiting the

local network and being forwarded around the network.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.2.2.1.11

Parameter: Broadcast Timer

Path: Configuration Manager > Protocols > IP > RIP Interfaces

Default: 30 seconds; 1 hour for dial-optimized routing

Options: 5 seconds to 86,400 seconds (24 hours); 1 hour to 1,209,600 seconds

(2 weeks) for dial-optimized routing

Function: Specifies how frequently RIP generates a full update of the routing table.

Instructions: Enter a value in 5-second increments.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.2.2.1.12

Parameter: Timeout Timer

Path: Configuration Manager > Protocols > IP > RIP Interfaces

Default: 90 seconds; 3 hours for dial-optimized routing

Options: 15 seconds to 259,200 seconds (72 hours); 3 hours to 3,628,800 seconds

(6 weeks) for dial-optimized routing

Function: Specifies the time period that RIP will wait for an update for a particular

network before declaring it to be unreachable.

Instructions: Nortel Networks recommends a timeout value of the broadcast time multiplied

by 3. Enter a time in 5-second increments.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.2.2.1.13

1 2 ... 322 323 324 325 326 327 328 329 330 331 332 ... 389 390

Sem comentários

Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services Manual do Utilizador Página 327