Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services Manual do Utilizador descarregar pdf (Página 228)

100

101

Configuring IP, ARP, RARP, RIP, and OSPF Services

6-44

308627-14.20 Rev 00

Disabling and Reenabling an Area

When you configure an OSPF area, it is automatically enabled. You can use the

BCC or Site Manager to disable and reenable the area.

Using the BCC

To disable or reenable an area, go to the OSPF area prompt (for example,

box; ip;

ospf; area/0.0.0.1

) and enter:

state

<state>

state

is either:

enabled (default)

disabled

For example, the following command disables area 0.0.0.1:

area/0.0.0.1#

state disabled

area/0.0.0.1#

Using Site Manager

To disable or reenable an OSPF area, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose Protocols.

The Protocols menu opens.

2. Choose IP. The IP menu opens.

3. Choose OSPF/MOSPF. The OSPF/MOSPF menu opens.

4. Choose Areas. The OSPF Areas window opens.

5. Click on the area that you want to edit. The parameter values for that area

appear in the OSPF Areas window.

6. Set the Enable parameter. Click on Help

or see the parameter description on page

A-49.

7. Click on Apply, and then click on Done. You return to the Configuration Manager

window.

1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 389 390

Comentários a estes Manuais

Sem comentários

Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services Manual do Utilizador Página 228

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services