Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services Manual do Utilizador descarregar pdf (Página 215)

100

101

Customizing OSPF Services

308627-14.20 Rev 00

6-31

You can use the BCC or Site Manager to specify a dead interval.

Using the BCC

To set the dead interval, go to an OSPF interface prompt (for example,

box;

eth 2/2; ip/2.2.2.2/255.255.0.0; ospf

) and enter:

dead-interval

interval>

interval

is the dead interval expressed in seconds (from 1 through 2,147,483,647).

For example, the following command sets the OSPF dead interval to 60 seconds

on IP interface 2.2.2.2:

ospf/2.2.2.2#

dead-interval 60

ospf/2.2.2.2#

Using Site Manager

To specify the dead interval, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose Protocols.

The Protocols menu opens.

2. Choose IP. The IP menu opens.

3. Choose OSPF/MOSPF. The OSPF/MOSPF menu opens.

4. Choose Interfaces. The OSPF Interfaces window opens.

5. Click on the OSPF interface that you want

to edit.

The parameter values for that interface

appear in the OSPF Interfaces window.

6. Set the Dead Interval parameter. Click on

Help or see the parameter description on

page A-44.

7. Click on Apply, and then click on Done. You return to the Configuration Manager

window.

1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 389 390

Comentários a estes Manuais

Sem comentários

Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services Manual do Utilizador Página 215

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services